PAPER TO PRINT
DROP JET®

80/88 gr. Non-woven made of cellulosis, polyester and fiber glass.
Fibrous aspect. Especialy designed for inkjet printing.

_______________________________________________________________
137/138 gr. Non-woven made of cellulosis and polyester, without fiber glass. Smooth texture. Especialy designed for inkjet printing.

Fire resistant M1, B1, Class 1, NFPA 701.

Indoor. Temporary architecture, kakemono, partitions, banners,
lamp shades, ceilings...

80gr. / 137 gr.: Thickness 0.22 mm. Ø core: 50 mm.
Length: 25 lm. Width: 0,914m / 36’’ - 1,27m / 50’’ - 1,372m / 54’’ - 1,52m / 60’’

______________________________________________________________

88gr.: Thickness 0.22 mm. Ø core: 76 mm. Length: 50 lm.
Width: 1,524m / 60’’ - 2,40m / 94’’

______________________________________________________________

138 gr.: Thickness 0.22 mm. Ø core: 76 mm.
Length: 50 lm. Width: 2,40 m / 94’’

80gr. / 137 gr.: DYE, UV.
88gr. / 138 gr.: ECO SOLVENT, SOLVENT, UV, LATEX.

Many fixing methods *
Double sided adhesive tape 3M 950 (hem pockets).
Velcro (Lighted Drop®).
Removable adhesive tape (Lightings).
* See instructions datasheet.

After usage, carefully place the roll vertically in the original packaging without humidity for the best conservation.

A hung lighting element or a ceiling installed in a dry and clean place can last more than 5 years.

• No curving effect.
• 137/138 gr.: dimensional stability inferior to 80 gr and 88 gr.
• 137/138 gr.: light diffusion inferior to 80 gr and 88 gr.
• One side printing only.
• Lightweight product.
• Good light diffusion.
• Difficult to re-use.
• Not water resistant.
• Delicate material.

 

Nota: This information corresponds to our present state of knowledge and is meant to inform you without obligation about our products and their use.