PAPER TO PRINT
DROP JET®

80/88 gr. Non-woven made of cellulosis, polyester and fiber glass.
Fibrous aspect. Especialy designed for inkjet printing.

_______________________________________________________________
137/138 gr. Non-woven made of cellulosis and polyester, without fiber glass. Smooth texture. Especialy designed for inkjet printing.

Fire resistant M1.

Indoor. Temporary architecture, kakemono, partitions, banners,
lamp shades, ceilings...

80gr. / 137 gr.: Thickness 0.22 mm. Ø core: 50 mm.
Length: 25 lm. Width: 0,914m / 36’’ - 1,27m / 50’’ - 1,372m / 54’’ - 1,52m / 60’’

______________________________________________________________

88gr.: Thickness 0.22 mm. Ø core: 76 mm. Length: 50 lm.
Width: 1,524m / 60’’ - 2,40m / 94’’

______________________________________________________________

138 gr.: Thickness 0.22 mm. Ø core: 76 mm.
Length: 50 lm. Width: 2,40 m / 94’’

80gr. / 137 gr.: DYE, UV.
88gr. / 138 gr.: ECO SOLVENT, SOLVENT, UV, LATEX.

Many fixing methods *
Double sided adhesive tape 3M 950 (hem pockets).
Velcro (Lighted Drop®).
Removable adhesive tape (Lightings).
* See instructions datasheet.

After usage, carefully place the roll vertically in the original packaging without humidity for the best conservation.

A hung lighting element or a ceiling installed in a dry and clean place can last more than 5 years.

• No curving effect.
• 137/138 gr.: dimensional stability inferior to 80 gr and 88 gr.
• 137/138 gr.: light diffusion inferior to 80 gr and 88 gr.
• One side printing only.
• Lightweight product.
• Good light diffusion.
• Difficult to re-use.
• Not water resistant.
• Delicate material.

 

Nota: This information corresponds to our present state of knowledge and is meant to inform you without obligation about our products and their use.